The hand board is simply a product model made only according to the 3D drawings provided by the customer without the need to open the mold. It is only used to check whether the appearance or structure of the product is reasonable.
There are different names in different regions. Usually, some industries that develop and design products need to make hand boards. The purpose of making Jinan hand boards is to verify the feasibility of products. If you do not make hand boards to test whether the products are reasonable, you can directly open the mold to do it. Once the structure of products produced in batches is unreasonable, which products are useless, or even cannot be used. Once the direct production is defective, all products will be scrapped, Moreover, the price of opening a set of molds is very expensive, and the price of making a hand board is much lower than that of opening a mold.
1、 Inspect the appearance and structure: through laser rapid prototyping, CNC numerical control processing and other process processing, make a simulated appearance or structure function board for developers and designers to inspect and evaluate the optimized shape and structure;
2、 Prediction of mold: problems that may occur in the manufacturing process: through the handmade, the problems that may occur in the mold production can be found, so as to avoid significant mold changes or even mold scrapping, thus reducing the cost and risk of mold production.
3、 Exhibitor: The hand board with very high degree of simulation can completely take the place of products to participate in various exhibitions or conduct market research. If the response is good, it can be transferred to mass production of molds.
The above is the relevant content of the introduction of the three functions of the hand board. I hope it can help you. Please come to our website for more matters http://www.the7streamsdream.com Consult and understand!